PSP SeedPro S2 Bearing - 6202
PSP SeedPro S2 Bearing - 6202
PSP SeedPro S2 Bearing
6202
A 6202 bearing spare for SeedPro S2 seeder repairs. Match the
full bearing marking and the machine’s parts instructions before replacement.
Equipment family: SeedPro S2 seeder
Product code: AGS-HW-1695
Why Choose This Product? Key Benefits
-
⚙️ Bearing function: Supports a rotating
assembly when correctly matched and fitted.
-
🔧 Seeder repair spare: A separate
replacement bearing for SeedPro S2 servicing.
Technical Specifications
| Parameter |
Details |
|---|---|
| Product family |
SeedPro S2 |
| Part type |
Bearing |
| Bearing designation |
6202 |
| Purpose |
Seeder repair |
| Pack quantity |
1 unit |
| Product code |
AGS-HW-1695 |
How It Works: Part Function
A bearing supports movement between rotating and stationary parts.
Correct fit and the right bearing version matter.
-
Match the bearing: Use the full marking and the specified bearing position in the machine’s parts instructions.
-
Preserve the assembly: Replacement should follow the seeder’s service procedure, not a guessed fitting method.
Suitable Equipment & Compatibility
-
Intended equipment: SeedPro S2 seeder, at the position specified for this matching bearing.
-
Not a universal replacement: Do not assume that every bearing marked 6202 has the same seals, shields or suitability.
Part Selection Guide
| Selection Check |
What to Match |
|---|---|
| Full marking |
Compare 6202 and any additional letters or suffixes with the specified replacement. |
| Dimensions and fit |
Confirm inner diameter, outside diameter and width against the original part and machine instructions. |
| Part identification |
Use product code AGS-HW-1695 when confirming the spare. |
Installation & Care: Best Practices
-
Prepare for service: Stop the seeder, secure it against movement and follow its service instructions.
-
Use suitable service support: Have a competent repairer confirm the bearing version and fit it using the correct tools and
procedure.
-
Avoid guessed maintenance: Do not add lubricant, remove shields or alter the bearing unless the equipment and bearing instructions
require it.
-
Check before return to use: Confirm the assembly is correctly secured and checked before operating the seeder.
Frequently Asked Questions
It is the bearing designation for this SeedPro S2 spare. Compare the complete marking, including any suffix, before replacement.
Do not assume it will fit. Match the exact bearing version, dimensions and machine requirements.
No. It is one bearing spare for seeder repair.
Follow the instructions for the exact bearing version and seeder. Do not add lubricant or open shields by guesswork.
Safety & Disclaimer
Before you use it: Confirm that the part matches the equipment and follow the equipment’s fitting and
care instructions. Stop and isolate the equipment before maintenance; use a competent repairer for work you cannot safely
carry out.
Secure the seeder against movement before service. Do not force an unmatched bearing into place or use
improvised fitting methods. Keep hands clear of moving parts and check the repaired assembly before
use.
Product information: AgroStar product page.