Biosens Sticky Trap Blue ( 33cm X 25cm- Set of 5 ) Double sided
Biosens Sticky Trap Blue ( 33cm X 25cm- Set of 5 ) Double sided
Biosens Sticky Trap Blue | 33 cm × 25 cm | Set of
5
Blue adhesive sheets for physical trapping and monitoring,
with a double-sided surface and a perforated design for flexible placement.
What it is: A set of five blue sticky sheets, each 33 cm × 25 cm.
Where to use it: Supported outdoor and greenhouse crop programmes for thrips and
leaf miners.
Before placing it: Choose the correct pest-monitoring plan and keep the release
paper in place until installation.
Why Choose This Product? Key Benefits
-
🪰 Physical trapping: The exposed adhesive
surface catches insects that contact the sheet.
-
↔️ Double-sided surface: Both sides provide a
sticky trapping surface after the release paper is removed.
-
✂️ Flexible sheet format: Perforations allow
each large sheet to be divided into three smaller units.
-
🧷 Straightforward mounting: Pre-punched
holes and supplied ties help secure the sheets above the crop foliage.
Technical Specifications
| Parameter |
Details |
|---|---|
| Brand |
AgroStar |
| Product |
Biosens Sticky Trap Blue |
| SKU |
AGS-CP-1125 |
| Pack |
5 double-sided sheets |
| Individual sheet size |
33 cm × 25 cm |
| Format |
Perforated sheet with protective release paper on both sides |
| Mounting features |
Pre-punched holes and ties |
| Product type |
Adhesive physical trap; not a pesticide spray |
How It Works: Physical Trapping
The blue sheet and its adhesive surface work together as a
physical trapping device. Use trap observations alongside crop inspection rather than assuming every crop problem is controlled by a
sticky sheet.
-
Expose the adhesive: Remove the release paper only when you are ready to install the sheet.
-
Position the sheet: Secure it above the plant foliage so the trapping surfaces remain exposed.
-
Observe the crop and catches: Check pest activity and the condition of the adhesive, then adjust the monitoring plan with
crop-specific advice.
Crop & Pest Suitability
Use for the listed crop groups and pest-monitoring purpose. A trap
does not treat a plant virus or reverse damage already present in the crop.
| Crop / Use |
Suitability & Conditions |
|---|---|
| Vegetables, fruits and flowers |
|
| Cotton, oilseeds, cereals and pulses |
|
| Medicinal plants |
|
Installation & Selection Guide
Confirm the installation plan before placing the sheets. Choose
the number and distribution for the crop, target pest, monitoring purpose and current infestation rather than treating a pack as a
fixed area-coverage promise.
| Selection Check |
What to Confirm |
|---|---|
| Full or divided sheet |
Use the large sheet or its perforated smaller sections as directed; do not assume a smaller section has the same trapping area
as a full sheet. |
| Position |
Insert a support through the slots and place the sheet above plant foliage, across the direction of the wind. |
| Start and inspection plan |
Confirm when to begin monitoring and how often to check catches for your crop and target pest. |
| Replacement |
Inspect adhesive condition and contamination; follow the pack’s replacement directions rather than relying on a guaranteed
service life. |
Setup & Care: Best Practices
-
Prepare safely: Wear suitable gloves and avoid touching the adhesive surface, eyes or clothing.
-
Uncover at installation: Peel away the release paper when the support and location are ready.
-
Secure the sheet: Use the holes, slots and ties to keep it above the foliage; maintain that position as the crop grows.
-
Inspect regularly: Check the trap and crop together. Replace damaged or ineffective sheets according to the current pack and
crop-management plan.
-
Store unused sheets: Keep protected sheets at room temperature in a clean, dust-free place and follow pack stacking
instructions.
Frequently Asked Questions
Five blue double-sided sticky sheets, each 33 cm × 25 cm. The product has pre-punched holes and ties for installation.
Yes. Its perforated design allows division into three smaller units. Plan their placement appropriately; do not treat each small section as a full-sized sheet.
Thrips and leaf miners in the listed vegetable, fruit, flower, cotton, oilseed, cereal, pulse and medicinal-plant crop groups, subject to the crop-management plan.
Above the plant foliage, supported through the slots and positioned across the wind direction. Keep the adhesive surfaces unobstructed.
No. It is a physical trapping aid for relevant insects. Inspect the crop, identify the problem and obtain appropriate advice for disease or other pest management.
Safety & Disclaimer
Before you use it: Read the current pack instructions and select the correct crop and pest-monitoring
plan. Avoid contact with the sticky surface, skin, eyes and clothing. Wear rubber gloves and suitable working clothes to
prevent skin contact, use local ventilation and wash hands after handling.
Keep unused sheets protected from dust and out of children’s reach. If adhesive contacts skin, wash
immediately with soap and plenty of water, remove and isolate contaminated clothing and shoes, and seek medical advice. Wash
contaminated clothing before reuse. For eye exposure, rinse immediately with plenty of water, keeping the eyelids open, for at
least 15–20 minutes. Remove contact lenses after the first 5 minutes if present and continue rinsing; seek medical advice if
irritation develops. If swallowed, rinse the mouth, seek immediate medical advice and do not induce vomiting. Never give
anything by mouth to an unconscious person. If inhalation causes symptoms, move to fresh air, keep the person warm and at
rest, and seek medical attention.
Collect used sheets and packaging for disposal in accordance with the label and local requirements. Do
not leave waste in drains or waterways. Actual trapping performance depends on placement, pest activity and sheet
condition.
Product guidance: AgroStar safety data sheet.