11% offAdvertisement
% off
AgroStar
Original product · In stock
Kill-X (Thiamethoxam 12.6% + Lambdacyhalothrin 9.5% ZC) 100 ml
₹311
₹
% off
MRP inclusive of all taxes
Original AgroStar
Arrives in 2–5 days
7-day easy returns
Not sure about the dose?Ask our expert on WhatsApp · 91002 10758
Chat
Product details
Kill-X Insecticide by AgroStar | 100 ml
Kill-X is a systemic and contact insecticide with stomach activity for the listed sucking and chewing pests. It is applied as a foliar spray according to the exact crop-and-pest directions on the supplied label. This listing is the 100 ml pack.
What it controls: Listed pests in chilli, cotton, groundnut, maize, soybean, tea and tomato. Match each crop to its own targets below.
When to use it: Confirm first-spray timing with the supplied label and crop-specific agronomic advice before use. Follow the strict flowering and bee restrictions below. Do not treat from 5 days before flowering until flowering has ended.
What to include: The measured product and matching water volume for the treatment area, with uniform crop coverage.
Why Choose This Product? Key Benefits
-
🎯 Crop-specific pest coverage: Covers the listed sucking and chewing pests across seven crops, rather than a single unrestricted pest list.
-
🌿 Systemic and contact action: Combines movement within the treated plant with contact activity; good spray coverage remains important.
-
⚡ Quick contact and stomach activity: The product leaflet describes quick activity by contact and ingestion against its listed targets.
-
🔬 Two active-ingredient groups: Thiamethoxam and lambda-cyhalothrin act through different insect nerve targets. Account for both groups in resistance planning.
Technical Specifications
| Parameter |
Details |
|---|---|
| Brand Name |
Kill-X by AgroStar |
| Technical Name |
Thiamethoxam 12.6% + Lambda-cyhalothrin 9.5% ZC |
| Active Ingredients |
Thiamethoxam 12.6% w/w + lambda-cyhalothrin 9.5% w/w |
| IRAC Classification |
IRAC 4A (thiamethoxam) + 3A (lambda-cyhalothrin) |
| Chemical Group |
Neonicotinoid + pyrethroid |
| Formulation |
ZC; liquid insecticide measured in millilitres |
| Manufacturer / Marketer |
Ulink Agritech Private Limited is named in the product leaflet. Check the supplied pack for its batch manufacturer. |
| Manufacturer-linked registrations |
AgroStar lists Advance Agro Life: CIR-140041/2017-Thiamethoxam + Lambda-cyhalothrin (ZC) (375)-834; and Ulink Agritech: CIR-218092/2022-Thiamethoxam + Lambda-cyhalothrin (ZC) (442)-732. Match the registration to the supplied pack. |
| This Pack |
100 ml |
How It Works: Mode of Action
Kill-X combines two active ingredients with different insect targets.
-
Contact and plant movement: The combination is described as systemic and contact, with stomach activity. Spray the crop evenly rather than relying on plant movement to correct gaps.
-
Thiamethoxam: IRAC 4A: Acts at insect nicotinic acetylcholine receptors, disrupting normal nerve signalling.
-
Lambda-cyhalothrin: IRAC 3A: Changes the action of sodium channels in insect nerves, a different target from thiamethoxam.
Plan resistance management using both IRAC groups. Changing only the brand name is not necessarily a change of mode of action, and a combination does not guarantee that resistance will not develop.
Target Crops & Pests
Keep each crop and its listed targets paired when checking the supplied label’s product, water, timing and harvest directions. Use only on crops and pests specified by the supplied label.
| Crop |
Target Pest(s) |
|---|---|
| Chilli |
|
| Cotton |
|
| Groundnut |
|
| Maize |
|
| Soybean |
|
| Tea |
|
| Tomato |
|
Dosage & Application Guide
Plan treatment from the current supplied label and crop-specific agronomic advice. Check the requirements below before measuring or mixing the product.
Application Requirements
| Planning Check |
What to Confirm |
|---|---|
| Crop and pest |
Match the crop and pest to the exact paired targets above. Do not extend a target from one crop to another. |
| First application |
Confirm the crop-specific first-spray timing with the supplied label and a qualified agronomist before treatment. A statement about repeat frequency is not a first-spray trigger. |
| Product and water |
Use the product quantity and water volume stated for the actual crop, target and treatment area on the supplied label. Pack volume is not a field rate or tank dose. |
| Method and coverage |
Use the labelled foliar method and suitable, calibrated spraying equipment for even crop coverage. Do not substitute seed treatment, soil drenching or an unlabelled application method. |
| Harvest and worker entry |
Confirm the crop-specific harvest interval and worker-entry requirements before application. They are different restrictions and must not be borrowed from another crop or brand. |
| Repeat treatment |
Follow the supplied product directions and product-specific agronomic advice. Pest-incidence-based frequency does not establish a fixed repeat interval or permission for another spray. |
| Pollinators and surroundings |
Follow the flowering, bee, drift and water-protection precautions below. Do not treat an excluded situation merely because a crop appears in the target table. |
Flowering and bee restrictions: Do not spray from 5 days before flowering until the end of flowering. Do not use where honey bees are pollinating or actively foraging, or where a high amount of aphid honeydew is present. Prevent drift onto nearby flowering crops, weeds and hedges. These restrictions apply to every listed crop.
How to Apply: Best Practices
-
Confirm crop and pest: Identify the listed target. Confirm the crop-specific first-application timing and other directions with the supplied label and a qualified agronomist before deciding to spray.
-
Measure the treatment area: Once the full crop-specific directions are confirmed, match the labelled product and water quantities to the actual area. Calibrate the sprayer to avoid gaps, excessive overlap or an incorrect water volume.
-
Mix thoroughly: Measure the required product, mix it with a small quantity of water, then add the remaining specified water with thorough agitation. Use suitable equipment, not kitchen utensils, and keep hands out of the mixture.
-
Apply as a foliar spray: Cover the crop evenly using a suitable sprayer. Do not substitute seed treatment, soil drenching or a low-volume application for these foliar programmes.
-
Respect the no-spray conditions: Keep the full 5-day pre-flowering-to-end-of-flowering restriction and all bee, honeydew and drift precautions above. Do not store unused spray solution. Clean spraying equipment after use without contaminating water.
-
Check any mixture: AgroStar lists compatibility with commonly used fungicides. This is not approval for every combination. Check both labels and obtain product-specific guidance before adding another pesticide, fertiliser or adjuvant.
-
Plan harvest and entry: Confirm and keep the crop’s labelled interval between the last spray and harvest. Follow current label requirements for workers entering the treated crop; a harvest interval is not an entry interval.
Frequently Asked Questions
1. Is Kill-X the same as Kopigo?
No. Kill-X contains thiamethoxam 12.6% + lambda-cyhalothrin 9.5% ZC. Kopigo contains chlorantraniliprole 9.3% + lambda-cyhalothrin 4.6% ZC. Their directions are not interchangeable.
2. Can I use the same directions for every listed crop?
No. Match each crop to its own listed pests and supplied-label directions. Product quantity, water, first-spray timing, harvest and entry requirements must be checked together for the actual use.
3. Can I spray during flowering if I avoid the hottest part of the day?
No. Do not spray from 5 days before flowering through the end of flowering, where bees are actively foraging, or where high aphid honeydew is present. A time-of-day choice does not remove these restrictions.
4. Does the stated 15-day effect mean I should spray every 15 days?
No. AgroStar describes a 15-day effect, but this is not a first-spray trigger, a fixed repeat-spray schedule or a guarantee of field performance. Follow the supplied label and product-specific agronomic advice before treatment.
5. Is this pack a fixed one-acre or one-tank dose?
No. Pack volume is the sale quantity. Confirm the full directions for the crop and pest, then measure the actual treatment area. Do not use the whole pack merely because it is one package.
Safety & Disclaimer
Before you use it: Read the current supplied pack label and leaflet. Match the crop, target, exact formulation, product quantity, water, foliar method, timing, harvest interval and all restrictions. Use only as directed for agriculture. This overview does not replace the supplied label or authenticate an individual pack.
Wear the protective clothing required by the label, including suitable gloves, boots and eye or face protection. Avoid breathing spray mist and prevent contact with skin and eyes. Do not eat, drink or smoke while handling. Wash exposed skin and contaminated clothing after use. Keep children, animals and unprotected people away.
This product is toxic to fish and honey bees. Prevent spray drift, spills and washings from reaching ponds, rivers, drains or other water sources. Keep the original container tightly closed in a cool, dry, ventilated, locked place, separate from food, feed and household articles. Follow the flowering, bee-foraging, honeydew and drift restrictions above in addition to the supplied label.
Do not reuse empty packaging. Dispose of product, washings and containers according to the current label and local authorised requirements without polluting soil or water. If exposure or illness occurs, stop work, seek urgent medical help and show the container, label or safety data sheet. Do not induce vomiting.
Product guidance: AgroStar product information · Product leaflet · Safety data sheet · IRAC classification.
Delivery & returns
Usually delivered in 2–5 days after dispatch.
Return or exchange within 7 days of delivery. Packs must be unopened with seals intact, and return pickup is free. Read the refund policy
Safety tips
Read the label and leaflet before use. Wear gloves, a mask and full sleeves while spraying. Do not eat, drink or smoke while spraying. Keep away from children, food and animal feed.
Ratings & reviews
No reviews yet. Bought Kill-X (Thiamethoxam 12.6% + Lambdacyhalothrin 9.5% ZC) 100 ml from us? Tell other farmers how it worked on your crop.
Share your review on WhatsAppSponsored picks
Ad
11% offAdvertisement
You may also like
Loading product recommendations