11% offAdvertisement
% off
AgroStar
Original product · In stock
HydroStar LDPE Lay Flat PipePack of Two
₹4,499
₹
% off
MRP inclusive of all taxes
Original AgroStar
Arrives in 2–5 days
7-day easy returns
Not sure about the dose?Ask our expert on WhatsApp · 91002 10758
Chat
Product details
HydroStar LDPE Lay Flat Pipe | 3 inch (75 mm) | 200
feet | Pack of two
A flexible LDPE lapeta pipe for irrigation-water conveyance,
supplied as a pack of two. Confirm the length of each piece and the required connections before planning your
installation.
Material: Low-density polyethylene (LDPE).
Purpose: Water conveyance for irrigation, including suitably designed drip or
sprinkler layouts.
Pack check: Pack of two, with a listed length of 200 feet. Confirm each piece’s
length before planning the run.
Why Choose This Product? Key Benefits
-
💧 Water-conveyance use: Intended for moving
irrigation water within an appropriately designed farm system.
-
🧰 Lightweight handling: The LDPE lay-flat
format is designed to be carried and installed conveniently.
-
📦 Foldable format: The flexible lay-flat
construction supports folding and handling when the pipe is not in use.
Technical Specifications
| Parameter |
Details |
|---|---|
| Brand / range |
AgroStar HydroStar |
| Material |
Low-density polyethylene (LDPE) |
| Pipe type |
LDPE lay-flat / lapeta pipe |
| Listed size |
3 inch (75 mm) |
| Listed length |
200 feet; confirm the length of each piece with the seller. |
| Pack quantity |
Two pieces |
| Listed uses |
Water conveyance and irrigation; suitability for drip or sprinkler layouts depends on the system and connections. |
| Product code |
AGS-HW-1711 |
How It Works: Water Conveyance
The flexible tube carries water through a suitable irrigation
layout. Its lay-flat construction assists handling and storage; it does not itself specify a flow rate or pressure
rating.
-
Plan the water route: Check the required run against the actual lengths supplied in the two-piece pack.
-
Match the connections: Select the correct joining parts and fastening method for the pipe and the system.
-
Use the intended service: Use for irrigation water within the operating conditions confirmed for this exact pipe.
Suitable Uses & Connection Requirements
AgroStar describes use for water conveyance and irrigation,
including drip and sprinkler layouts. This is not a claim that every pump, sprinkler or drip fitting will fit or operate safely with
this pipe.
-
Irrigation-water transfer: Use as a conveyance pipe in a suitably designed irrigation setup.
-
Drip or sprinkler layouts: Have the supplier confirm the pipe’s pressure suitability and required adapters for the proposed layout
before connection.
-
Other liquids or services: Obtain explicit manufacturer approval for any use other than irrigation water; a general farm-use
description is not a chemical-compatibility specification.
Size & Pack Selection Guide
The inch and millimetre figures below are the supplier’s stated
size pair. Check the actual pipe and connector dimensions rather than using either figure as an exact conversion.
| Selection Check |
What to Confirm |
|---|---|
| Size identification |
This variant is listed as 3 inch (75 mm). The size label does not establish an internal-bore or outside-diameter
tolerance. |
| Diameter measurement |
AgroStar describes measuring around the pipe and dividing that circumference by 3.14. This is not the same measurement as the
width of the pipe lying flat. |
| Pack and length |
The listing states 200 feet and pack of two. Confirm the length of each piece before deciding how much continuous pipe your
installation needs. |
| Connection and pressure |
Confirm suitable joiners, fastening method and the permitted working pressure with the supplier before installation. |
Setup & Care: Best Practices
-
Inspect before use: Check the pipe and connection points for cuts, damage and loose fittings before supplying water. Do not use a
damaged section.
-
Confirm the connection: Have your irrigation supplier match the pipe, joiner and fastening method. Follow the current pipe and
fitting instructions rather than selecting a connector from the inch name alone.
-
Confirm operating limits: Obtain the permitted working pressure and operating conditions for this exact pipe before connecting it
to a pressurised system. Do not choose a pump solely by pipe diameter.
-
Prepare the route: Keep the route clear of sharp objects and protect the pipe from fire. Do not force the pipe into a damaged or
sharply creased position.
-
Check during use: Watch the pipe and joints for leakage or movement. Stop the water supply if a problem appears; do not tighten or
repair a live, pressurised connection.
-
Handle after use: Stop the supply and release pressure before disconnecting, moving or putting the pipe away. Keep the pipe clear
of sharp tools during handling and storage.
-
Follow the supplied directions: Use the current pack instructions for setup, cleaning and repairs. Ask the supplier about any
missing fittings or unclear operating limits before use.
Frequently Asked Questions
1. What material and size is this variant?
This is the 3 inch (75 mm) HydroStar LDPE lay-flat pipe, listed as 200 feet in a pack of two. LDPE means low-density polyethylene.
This is the 3 inch (75 mm) HydroStar LDPE lay-flat pipe, listed as 200 feet in a pack of two. LDPE means low-density polyethylene.
2. Is the stated diameter the width of the pipe when flattened?
No. AgroStar’s diameter check uses circumference divided by 3.14, not the flat width. Confirm whether the fitting needs an inside or outside dimension and check the supplied pipe before buying connectors.
No. AgroStar’s diameter check uses circumference divided by 3.14, not the flat width. Confirm whether the fitting needs an inside or outside dimension and check the supplied pipe before buying connectors.
3. Does pack of two tell me the length of each piece?
Confirm each piece’s length with the seller before ordering or planning a continuous run. The two pieces should not be treated as one uninterrupted pipe; any join requires suitable connecting parts.
Confirm each piece’s length with the seller before ordering or planning a continuous run. The two pieces should not be treated as one uninterrupted pipe; any join requires suitable connecting parts.
4. Can I use it with my drip system, sprinkler or pump?
AgroStar lists irrigation-water conveyance, including drip and sprinkler layouts. Actual suitability depends on the system pressure, pipe dimensions and connections, so have your irrigation supplier check the exact setup first.
AgroStar lists irrigation-water conveyance, including drip and sprinkler layouts. Actual suitability depends on the system pressure, pipe dimensions and connections, so have your irrigation supplier check the exact setup first.
5. Is it guaranteed to resist every chemical or last a fixed number of years?
Do not assume universal chemical compatibility or a fixed service life. Use it for the intended irrigation-water service, check the current pack directions, and confirm the seller’s applicable support and replacement terms at purchase.
Do not assume universal chemical compatibility or a fixed service life. Use it for the intended irrigation-water service, check the current pack directions, and confirm the seller’s applicable support and replacement terms at purchase.
Safety & Disclaimer
Before you use it: Read the current product-pack instructions and confirm that this exact pipe and its
fittings are suitable for your irrigation system. Have an irrigation supplier check the connection and operating limits before
use.
Keep the pipe away from fire and sharp objects. Isolate the water supply and release pressure before
disconnecting or repairing a line. Stop using any damaged section until it has been assessed and repaired or replaced
appropriately.
Use this listing for irrigation-water selection, not as approval for drinking water, hot water,
compressed air or chemical transfer. Obtain explicit manufacturer guidance before considering any different
service.
Dimensions and pack descriptions must be checked against the supplied product and intended fittings. Do
not infer a pressure rating, service life, certification or pump compatibility from the material, size name or product
photograph.
For product-specific guidance, consult the current pack instructions and your irrigation
supplier.
Delivery & returns
Usually delivered in 2–5 days after dispatch.
Return or exchange within 7 days of delivery. Packs must be unopened with seals intact, and return pickup is free. Read the refund policy
Safety tips
Read the label and leaflet before use. Wear gloves, a mask and full sleeves while spraying. Do not eat, drink or smoke while spraying. Keep away from children, food and animal feed.
Ratings & reviews
No reviews yet. Bought HydroStar LDPE Lay Flat Pipe from us? Tell other farmers how it worked on your crop.
Share your review on WhatsAppSponsored picks
Ad
11% offAdvertisement
You may also like
Loading product recommendations