11% offAdvertisement
15% off
Syngenta
Original product · In stock
GLO-iTPropiconazole 13.9% w/w + Difenoconazole 13.9% w/w EC
₹280
₹329
15% off
MRP inclusive of all taxes
Original Syngenta
Arrives in 2–5 days
7-day easy returns
Not sure about the dose?Ask our expert on WhatsApp · 91002 10758
Chat
Product details
GLO-iT Fungicide | Propiconazole 13.9% + Difenoconazole 13.9% EC
A triazole fungicide premix for sheath blight and dirty panicle (grain discolouration) in paddy.
What it controls: Sheath blight and dirty panicle in paddy.
When to use it: While disease is active but still at an early stage, with at least 46 days left before harvest.
What to include: Measured product, 500 L water/ha and a crop-specific plan that respects the harvest interval.
Why Choose This Product? Key Benefits
-
🌾Focused on paddy disease: The recommendation is for sheath blight and dirty panicle in paddy. This clear crop–disease pairing helps avoid choosing treatment simply because leaves or grain look discoloured.
-
🛡️Two triazole active ingredients: Propiconazole and difenoconazole are supplied together in one formulation, so there is no need to prepare that two-active combination as a separate farm-made mixture.
-
🍃Disease control through sterol inhibition: Both ingredients interfere with production of sterols needed by fungal cell membranes, helping restrict susceptible fungal growth.
-
⏱️Useful for early intervention: The application advice favours treatment during early disease development. Timely scouting is therefore more useful than waiting until severe symptoms are visible throughout the crop.
-
💧An explicit spray concentration: The leaflet gives 0.7–1.0 ml/L together with a fixed area-based water volume. Keeping these linked supports accurate measuring and consistent field application.
Technical Specifications
| Parameter |
Details |
|---|---|
| Brand Name |
GLO-iT — Syngenta India Limited. |
| Technical Name |
Propiconazole 13.9% w/w + Difenoconazole 13.9% w/w EC. |
| FRAC MoA Code |
Group 3 for both active ingredients — DMI fungicides. |
| Chemical Group |
Triazoles; demethylation inhibitors in sterol biosynthesis. |
| Formulation |
EC — emulsifiable concentrate for foliar application. |
| Toxicity Label |
Danger; moderately toxic. Follow pack PPE, storage and environmental precautions. |
How It Works: Mode of Action
GLO-iT combines two members of the same fungicide mode-of-action group. It is a two-active premix, but not a mixture of two different FRAC groups.
-
Spray reaches the crop: Apply an even foliar spray so the treatment reaches the intended plant surfaces. Poor coverage cannot be corrected simply by choosing a stronger concentration.
-
Fungal sterol production is disrupted: Propiconazole and difenoconazole inhibit C14-demethylase in sterol biosynthesis. Sterols are important components of fungal cell membranes, which regulate what enters and leaves the cell.
-
Susceptible fungal growth is restricted: Interfering with normal membrane formation limits development of susceptible fungi. Early treatment helps manage disease progression; already damaged crop tissue is not repaired.
Both ingredients are FRAC Group 3. Alternating GLO-iT with another propiconazole, difenoconazole or other Group 3 product is not a different-mode rotation. Use an appropriate locally advised disease programme rather than repeated reliance on the same group.
Target Crops & Pests
Use only for the paddy disease recommendation below.
| Crop |
Target Pest(s) |
|---|---|
| Paddy (rice) |
Diseases
|
Grain discolouration is a disease description, not proof of its cause. Do not assume every discoloured panicle or sheath symptom is covered by this fungicide, and do not extend the recommendation to other crops.
Dosage & Application Guide
The labelled concentration is 0.7–1.0 ml/L in 500 L water/ha. The product amount per hectare and acre below is calculated from that combination.
Dosage per Acre, Litre, & Pre-Harvest Interval (PHI)
| Crop |
Dose (ml / Acre) |
Water (L / Acre) |
Dose (ml / Litre) |
PHI (Days) |
|---|---|---|---|---|
| Paddy (rice) |
Approx. 142–202 ml Equivalent: 350–500 ml/ha |
Approx. 202 L Original: 500 L/ha |
0.7–1.0 ml |
46 days |
Treat early disease development and leave the full 46-day interval before harvest. Do not interpret the name “dirty panicle” as permission for a near-harvest spray.
Acre conversions use 0.40468564224. The equivalent 350–500 ml/ha is calculated as 0.7–1.0 ml/L × 500 L/ha; it is not a separately printed hectare formulation entry.
PHI means the minimum waiting period from the last application to harvest. It does not specify a repeat interval or worker re-entry time. No fixed repeat schedule or tank mixture is prescribed here.
How to Apply: Best Practices
-
Inspect and identify the problem: Check the sheath and panicle symptoms and obtain a reliable diagnosis where the cause is uncertain. Fungicides do not correct every cause of poor grain quality or leaf discolouration.
-
Check harvest timing first: Before preparing spray, confirm that the planned harvest remains at least 46 days away. If that interval cannot be met, do not shorten it or copy a waiting period from a different fungicide.
-
Measure product and water together: Use the table as a linked programme. A change in water output changes the area covered, so calibrate the sprayer rather than assuming every tank treats the same area.
-
Mix with appropriate equipment: Follow the current pack’s dilution instructions and use dedicated measuring and stirring equipment. Do not use cooking utensils or hands to mix pesticides.
-
Apply uniformly: Direct the spray to the crop with even coverage. Prevent drift and keep spray, leftover mixture and washings out of nearby water and drains.
-
Keep a simple spray record: Record product, crop, dose and application date. Make sure everyone arranging harvest knows the waiting period, especially if a later application changes the earliest harvest date.
-
Plan any further treatment carefully: Do not automatically add another fungicide, insecticide or fertiliser to the tank. Confirm a product-specific recommendation, and account for both ingredients’ shared Group 3 mode of action.
Frequently Asked Questions
1. Which diseases is GLO-iT used for?
The paddy recommendation covers sheath blight and dirty panicle, also described as grain discolouration. Confirm the actual disease before treatment rather than assuming all similar-looking symptoms have the same cause.
2. Do its two ingredients provide two different modes of action?
No. Propiconazole and difenoconazole are both triazole DMI fungicides in FRAC Group 3. A two-active product can still exert the same type of resistance-selection pressure.
3. How much product is used for one acre?
At the labelled 0.7–1.0 ml/L in 500 L water/ha, the calculated equivalent is approximately 142–202 ml product in 202 L water per acre. Keep the concentration and water volume paired, and follow the current pack when selecting within the range.
4. Can I spray after seeing dirty panicles shortly before harvest?
Only a treatment that meets all label directions, including the 46-day harvest interval, can fit this recommendation. Do not make a late application if the crop will be harvested sooner, and do not assume treatment will reverse existing grain damage.
5. Can I mix GLO-iT with another product to save a spray?
This description does not establish a specific tank-mix recommendation. Check the labels and obtain a product-specific recommendation before mixing; a mixture that looks physically uniform is not proof of crop safety or suitable residue management.
Safety & Disclaimer
Wear the protective clothing, gloves, eye protection, mask and boots specified on the pack. Avoid skin or eye contact and inhalation of spray. Do not eat, drink or smoke while handling the product; wash thoroughly and change contaminated clothes afterwards.
Store in the original closed container in a locked, dry, ventilated place separate from food and feed. Keep children and animals away. Prevent contamination of water bodies and do not reuse empty containers.
Dispose of leftover product, containers and washings according to the current label and applicable local requirements. If exposure or illness occurs, seek medical help promptly with the product label. Do not induce vomiting or give anything by mouth to an unconscious person. No home-treatment advice should replace professional care.
Read the current Indian GLO-iT label and leaflet before use. The crop, diseases, rate, water volume, application method, harvest interval and precautions form one recommendation and must be followed together.
Delivery & returns
Usually delivered in 2–5 days after dispatch.
Return or exchange within 7 days of delivery. Packs must be unopened with seals intact, and return pickup is free. Read the refund policy
Safety tips
Read the label and leaflet before use. Wear gloves, a mask and full sleeves while spraying. Do not eat, drink or smoke while spraying. Keep away from children, food and animal feed.
Ratings & reviews
No reviews yet. Bought GLO-iT from us? Tell other farmers how it worked on your crop.
Share your review on WhatsAppSponsored picks
Ad
11% offAdvertisement
You may also like
Loading product recommendations